Headlight lamps replacement (position light and low headlight). Photoreport

Position light lamps replacement
(left and right side identically)

1. Unscrew a choke from a headlight.


2. Find wires on position light. Yellow and black.
We pull at wires and draw out a cartridge with a lamp.


3.In gloves (or by a shawl, fabric, main not with bare hands) draw out one lamp, insert other.

4. Put a cartridge at a place, trying to insert deeper to support.

5. We do not forget to put a choke back.

I put itself lamps of Philips Blue Vision

Left side identically.
All.

Low Headlight Lamps Replacement.
(left and right side a bit differ)

Right side.

1. It is necessary to take off the tank of antifreeze. For this purpose the key (head) may need on 10mm.
It is necessary to untwist 2 screw-bolts.
Move aside a tank aside

2. Unscrew the choke of headlight of near light.

3. If will not turn out to unbend a clamping spring, it will be necessary to use the tool of Torx T 20, to weaken inhaling of screw-bolt upside a lamp and take off a spring.
After it draw out a cartridge with a lamp.

4.In gloves (or by a shawl, fabric, main not with bare hands) draw out one lamp, insert other.

5. We put a cartridge at a place, from above pin a spring. Main neatly to insert everything into the places, a lamp must stand exactly without defects.
If it was necessary to unscrew the screw-bolt of Torx, simpler at first to put a spring, then to twirl a screw-bolt.

6. We do not forget to put a choke back.

7. We bind a tank with an antifreeze into place.

I put lamps of Philips Blue Vision

Left side.

Left side is analogical.
The tank of antifreeze is not present - by one problem less than.
A clamping spring stepped back easily, it was not necessary to unscrew the screw-bolt of Torx.
The size of my hand allowed to work not taking off and not moving aside an accumulator.

All of work occupied about 1 hour.

Appendixes.
Torx T20

Position light comparison

Low Headlight comparison

"Fidget".

Ceed Club Ukraine
kia-forums.com